Welcome to our Online Store
Tripods & Mounts
In this accessories section you can find information about the various tripods and mounts that we recommend with OptiTrack cameras and ARENA software.
Note For Motion Capture Applications: Movement of motion capture cameras after calibration will result in poor data quality. We suggest using high quality tripods, firm wall mounts, or custom truss rigging*, including conduit pipes, to mount the cameras in a rigid fashion to one another. Please feel free to inquire about your specific setup questions.
* NaturalPoint recommends truss systems from Milos Structural Systems and Trussworks.com.
Facial Mocap Mounting Solutions
Put together the ideal kit for desktop facial motion capture with ARENA Expression.
  |
Facial Mocap Mounting Kit $449 Our recommended mounting kit for use with ARENA Expression. Suitable for up to 7 cameras. Includes: • 3 Manfrotto Desktop Tripod Kits (3 tripods & 6 extensions) • 4 ClamperPod 2 Mini Camera Tripods • 1 Giottos Mini Ballhead (See the Face Motion Capture page for a recommended camera setup diagram.) (Part #TR1055) |
|
 |
Manfrotto Desktop Tripod Kit (#209, #482 & #259B) $117 Made of rugged, heavy-duty aluminum, the Manfrotto #209 Table Top Tripod folds down small enough to slip into your pocket. Each Manfrotto Desktop Tripod Kit includes the entire tabletop arsenal: legs and ballhead (#209, #482) and two extensions (#259B). (Part #TR1050) |
|
 |
ClamperPod 2 Mini Camera Tripod $25 ClamperPod 2 is strong enough to hold even the heaviest cameras, but weighs only 2 ounces. Clamp to tubular objects from 1/4" to 1 1/2" in diameter. Attaches to any camera with a standard 1/4x20 tripod socket. (Part #TRA1040) |
|
Camera Stand with Manfrotto Super Clamps
(Recommended Camera Mounting Solution #1)
 |
Camera Stand : 10ft $75 Heavy-duty universal stand has a 3-shaft, 2-clutch design. Allows for maximum height adjustments up to 10 feet and will support up to 140 lbs. Features double brace leg supports, extra long legs and locking pin for sturdiness. Base spread is 38"-58", narrower that most tripods that can reach this height, and the single pole gives multiple mounting locations for cameras. A sturdy and low cost way to mount 2-3 cameras, for an installation or a mobile rig. Note: This item does not come with any camera mounts. We recommend purchasing two Manfrotto Super Clamps with 3-way Heads. (Part #TR0004) |
|
  |
Manfrotto Super Clamp with 3-way Head (#056, #035 & #037) $62 Use this clamp to add camera mounts to sturdy tripod legs, light poles or truss structures. It can also be used on flat surfaces and pipes. (Part #TRA1010) |
|
Manfrotto Wall Mount with Head
(Recommended Camera Mounting Solution #2)
 |
Manfrotto Wall Mount with Swivel-Tilt Head (#356) $49 Easily mount cameras on walls and keep and open capture volume with this high quality wall mount bracket and camera head assembly. (Part #TRA1015) |
|
Manfrotto Tripod with Head
(Recommended Camera Mounting Solution #3)
 |
Manfrotto Studio Grade Tripod : 8ft (#028B & #056) $325 With an extended height of over 8' this high quality tripod is perfect for motion capture. A Manfrotto 3-way head (#056) is included for easy camera mounting. (Part #TR1010) |
|
SLIK Clamp Heads
(Alternative Mounting Options)
 |
SLIK Clamp Head 38mm $69 Combination of clamp and camera platform. Mounts on tripod leg or on a pipe with a diameter of 28 to 38mm. Width: 95mm (3.74"). Length: 150mm (5.9"). Height: 80mm (3.14"). Load Capacity: 11 lbs. (Part #TRA1035) |
|
Small Tripods
(Desktop Camera Mounting Solutions)
 |
Mini Tripod $13 Stands 90 mm tall. Extends to 155 mm (4") tall. Thread is standard 1/4"-20. (Part #TR1020) |
|
